by admin

New #foodsafety #recall #undeclared #egg #allergen in Waterfront Bistro Tartar Sauce

For Immediate Release: Silver Spring Foods, Inc. Voluntarily Recalling Waterfront Bistro Tartar Sauce Due To Possible Mislabeling and Undeclared Allergen

September 26, 2017

Contact

Consumers

 customerservice@silverspringfoods.com
 1-800-826-7322 
Recall hotline 
 1-800-280-1968
Albertsons Companies Customer Service 
 1-877-723-3929

Announcement

View Product Photos
Silver Spring is voluntarily recalling Waterfront Bistro Tartar Sauce because there is a chance an incorrect back label was attached to the product, which does not correctly identify ingredients that could pose an allergen risk; specifically egg.  
 
People who have an allergy or severe sensitivity to eggs run the risk of serious or lifethreatening allergic reaction if they consume this product.   
 
The recalled product has a Best By date of JUL 31 18 S3551 or AUG 28 18 S3351and an incorrect UPC barcode: 21130 12242 (Hot Cocktail Sauce). No other Silver Spring or Waterfront Bistro products are affected by the recall. Silver Spring is taking the extra precautionary measure of issuing this recall so that consumers who may have purchased the product are properly made aware. 
The recalled product is retailed under the Brand name Waterfront Bistro Tartar Sauce and is distributed at Albertsons, Amigos, Jewel-Osco, Lucky, Market Street, Pak N Save, Pavilions, Randall’s, Safeway, Shaw’s, Star Market, Tom Thumb, United Supermarkets, & Vons stores in the following states: Arizona, Arkansas, California, Delaware, Florida, Hawaii, Iowa, Idaho, Illinois, Indiana, Louisiana, Maine, Maryland, Massachusetts, Montana, Nebraska, Nevada, New Hampshire, New Mexico, North Dakota, Oregon, Rhode Island, South Dakota, Texas, Utah, Vermont, Virginia, Washington, Washington DC, Wyoming. 
 
No illnesses or consumer complaints have been reported to date. 
 
The recall was initiated after production checks at our manufacturing facility found the incorrect back label for Hot Cocktail Sauce instead of Tartar Sauce.  The manufacturing lot of labels from our supplier was also utilized in the production dates/lot codes of BEST BY: JUL3118 S3351 and BEST BY:AUG2818 S3351.  The defect identified was caused by a temporary breakdown in our label supplier’s production and quality control processes.  
 
Consumers who have the recalled product in their possession and are allergic to egg should not consume the item. The product can be returned to the place of purchase for a full refund. Consumers with questions should contact Silver Spring Foods at 1-800-826-7322 Monday through Friday from 7:30 am to 4:30 pm Central Standard Time or via Customerservice@silverspringfoods.com.  Consumers may also call our Recall hotline at 1-800280-1968. Customers can also call Albertsons Companies Customer Service at 1-877-723-3929 at any time. 
The following product with a Best By date of JUL 31 18 S3351 or AUG 28 18 S3351 and an incorrect back label is subject to this recall. The best by date can be found on the back of the bottle:
###
by admin

September is ‪#‎National‬ ‪#‎Foodsafety‬ ‪#‎Education‬ month #NFSM. Today’s lesson: How to set up a three-compartment dish washing station.

Cleaning in a three-compartment sink is actually very simple, as long as you know which way to move through the sink stations. It doesn’t matter if you go left to right or right to left, just as long as you are consistent to ensure that the clean dishes are not contaminated after drying.

The first of thee sinks will be for washing, and should be filled with detergent and water at least 110 degrees F (43 degrees C).

The second sink is for rinsing and should be filled with clean water. Some jurisdictions allow for the use of running water for rinsing, check your local health code or department.

The third sink is designed for sanitizing and should be filled with water and an approved sanitizer.

Here are the steps involved with using a three-compartment sink for dish washing.

•Step
1: Scrape items before washing them. If necessary, items can be rinsed
or soaked.
•Step
2: Wash items in the first sink. Use a brush, cloth towel, or nylon scrub pad
to loosen dirt. Change the water and detergent when the suds are gone or the
water is dirty.
•Step 3: Rinse items in the second
sink. Spray the items with water or dip them in it. Make sure you remove all
traces of food and detergent from the items being rinsed. If dipping the items,
change the rinse water when it becomes dirty or full of suds.
•Step 4: Sanitize items in the third
sink. Change the sanitizing solution when the temperature of the water or the
sanitizer concentration falls below requirements. Never rinse items after
sanitizing them. This could contaminate their surfaces.

•Step 5: Air-dry items on a clean
and sanitized surface. Place items upside down so they will drain. NEVER use a towel to dry items, as it
could contaminate them.
Tomorrows lesson: What are the approved sanitizers and how does sanitizing work?
by admin

September is ‪#‎National‬ ‪#‎Foodsafety‬ ‪#‎Education‬ month #NFSM. Today’s lesson: What are TCS foods and what does TCS stand for?

Starting off with the easy part of the question, what does TCS stand for? TCS in relations to food safety stands for Time & Temperature Control for Safety. This designation is given to foods that are considered more susceptible to foodborne illness cause bacteria and thus must be carefully monitored to ensure that they remain safe. This designation has replaced the previous designation of PHF, which stands for Potentially Hazardous Foods. (personally, I still use and prefer the designation PHF).

There are 12 food groups that are considered TCS foods, and are listed as thus:

Milk & Dairy products
Shell Eggs (except those treated to eliminate nontyphodial Salmonella)
Meat: such as beef, pork, and lamb
Poultry
Fish
Shellfish & crustaceans
Baked potatoes
Heat-treated plant foods, such as cooked rice, beans, and vegatables
Tofu or other soy protein & synthetic ingredients such as textured soy protein in meat alternatives
Sprouts and sprout seeds
Sliced melons, cut tomatoes, & cut leafy greans
Untreated garlic-and-oil mixtures

The main commonality of these items is that pathogens grow well in each of them. Controlling the time – temperatures of each will help reduce the chance of harmful pathogens growing on each of these.

Tomorrows lesson: How to set up a three-compartment dish washing station.

by admin

September is ‪#‎National‬ ‪#‎Foodsafety‬ ‪#‎Education‬ month #NFSM. Today’s lesson: Who are more at risk of getting foodborne illnesses?

When it comes to foodborne illnesses, some individuals are more susceptible to harmful bacteria than other individuals. The following is a list of individuals that are considered “High Risk populations” for foodborne illnesses.

Elderly people
     As we age, our immune systems begin to weaken. In this weakened state, we become more susceptible to foodborne illnesses.
Preschool-age children
     Immune systems in the very young may not have strengthened to a point where they can successfully fight a foodborne illness. 
People with compromised immune systems
     These can include people on certain medications and people that are dealing with certain medical conditions, which can weaken an individuals immune system. Some of these conditions include but are not limited to: individuals with cancer or having chemotherapy, individuals with HIV or AIDS, and transplant patients.
Special care should be taken for each of these types of individuals, and especially if you are dealing specifically with these populations as a whole, such as at retirement homes, preschools, and hospitals or hospices.
Tomorrows lesson: What are TCS foods and what does TCS stand for?
by admin

September is ‪#‎National‬ ‪#‎Foodsafety‬ ‪#‎Education‬ month #NFSM. Today’s lesson: How foods become unsafe.

After yesterdays advanced food safety lesson, I decided to give everyone a break and provide you a more simpler lesson for today.
There have been identified five (5) of the most common risk factors that cause foodborne illnesses. They are:
1. Purchasing food from unsafe sources
2. Failing to cook food adequately
3. Holding food at incorrect temperatures
4. Using contaminated equipment
5. Poor Personal hygiene
Lets break each of these down on how they impact food safety.
1. Purchasing food from unsafe sources
Since food can become contaminated at any point within the food supply chain, it is important that food be purchased from approved reputable suppliers. An approved supplier is one that has been inspected and meets all applicable local, state, and federal laws.
2. Failing to cook food adequately
By not cooking foods to their required minimal internal temperatures, it is impossible to know if any contaminates have been destroyed in the cooking process. Back in 1993, this was the cause of the E.coli outbreak within the Jack-in-the-Box restaurants. The employees felt that cooking to the required temperature dried out the burgers too much, so they cooked to a lower temperature, which did not destroy the E.coli bacteria. This resulted in numerous illnesses and approximately 171 hospitalizations, and four children died. (more information available on this outbreak at:http://www.marlerclark.com/case_news/view/jack-in-the-box-e-coli-outbreak-western-states
3. Holding food at incorrect temperatures
This gets back to the conversation about the temperature danger zone. If you don’t hold the product above 135 degrees or below 41 degrees bacteria will grow and result in foodborne illnesses from the products.
4. Using contaminated equipment
Making sure that the equipment you use to prepare food is washed, rinsed, and sanitized before using it will help prevent cross contamination of equipment. Ensuring that you use a new/clean knife or cutting board for each item, will also reduce the chance of cross contamination.
5. Poor Personal hygiene
Ensuring that the employees follow proper hygiene procedures is very important in keeping food safe. This includes washing hands properly and at the proper times. Not coming to work sick, and ensuring that other personal hygiene requirements are followed.
If you have any questions about anything that I present in these lessons, or have a question about anything regarding food safety, please feel free to contact me.
Tomorrows lesson: Who are more at risk of getting foodborne illnesses?
by admin

New #foodsafety #recall #undeclared #milk #allergen in select Ri Wang Food Group Seafood Products

America New York Ri Wang Food Group Issues Allergy Alert on Seafood Products

September 22, 2017

Contact

Consumers

 1-718-628-8999

Announcement

View Product Photos
America New York Ri Wang Food Group Co. ltd is recalling the following products because an allergenic ingredient, milk, was not declared in labelling. People who have an allergy or severe sensitivity to milk run the risk of serious of life-threatening allergic reaction if they consume these products.
CFIA detection initially found this issue, and we are voluntarily recall the similar ingredients of other products.
Product was distributed in the following states NY, NJ, MA, RI, PA, MD, IL, and reached consumers via retail stores. The products were also distributed to food service providers.
The product is sold frozen. The recall includes all lot numbers of the following products.
No illnesses have been reported to date in connection with this problem.
FDA and the company continue their investigation as to the source of the problem.
Consumers who have purchased the above products are urged to return them to the Manufacturer for a refund. Consumers with questions may contact the company at 1-718-628-8999, Monday – Friday, 9am – 5pm EST.
###
by admin

September is ‪#‎National‬ ‪#‎Foodsafety‬ ‪#‎Education‬ month #NFSM. Today’s lesson: Understanding H.A.C.C.P. for food safety.

Todays lesson will be a little bit more advanced, but will help many of you understand the principles behind food safety and how to determine the best way to control the food to ensure that the food is being prepared safely.
H.A.C.C.P. (pronounced as Hassip), stands for Hazard Analysis Critical Control Points, and is designed to allow the food service establishment to study the flow of food through the operation and determine where and how to make corrective actions to ensure that proper food safety procedures are being followed. H.A.C.C.P. was was originally designed when NASA asked the Pillsbury company to manufacture food for space flights.
A H.A.C.C.P. plan is designed around seven principles:
1. Conduct a hazard analysis
2. Determine critical control points (CCPs)
3. Establish critical limits
4. Establish monitoring procedures
5. Identify corrective actions
6. Verify that the system works
7. Establish procedures for record keeping and documentation
Lets take an example and run through these seven principles to better understand how they work.
Step 1. Conduct a hazard analysis
When looking at your menu items, look for how the items are processed within the facility. The most popular processes are: Preparing and serving without cooking (salads, cold sandwiches, etc), preparing and cooking for the same-day service (grilled chicken sandwiches, steaks, hamburgers, etc), and preparing, cooking, holding, cooling, reheating, and serving (chili, soups, some pasta dishes, etc). Next, it is important to determine which foods are considered Temperature Control for Safety (TCS) foods, and determine where food safety hazards are likely to appear for each food item, and determine what type of hazard could occur (physical, chemical, biological).
For example, At the Merou Grotto, I do my Dr. Ed’s Insane Chicken Sandwich, where I get the chicken delivered the same day as I will be cooking it. I have determined that bacteria (biological) is the most likely hazard that I would be dealing with.
Step 2. Determine critical control points (CCPs)
Now that we have the menu items separated by process and potential hazard, It is time to find the locations in the process where the hazards can be prevented, eliminated, or reduced to safe levels. Depending on the process involved with preparing a certain food item, there may be more than one CCP.
In my chicken sandwich example, I have identified that it must be handled safely throughout the process of removing excess fat and marinating; however, cooking is the only time in which bacteria would be “prevented, eliminated, or reduced to safe levels”, So cooking will be my CCP.
Step 3. Establish critical limits
For each CCP that is determined for each item, you must establish a minimum or maximum limit that must be met in order to “prevented, eliminate, or reduced to safe levels”.
In my example of the chicken sandwich, and as stated in one of the previous lessons, chicken needs to be cooked to a minimum 165 degrees F (74C) for 15 seconds. As this is the standard for food safety, I have adopted it as my critical limit for cooking my chicken sandwiches.
Step 4. Establish monitoring procedures
Once the critical limit has been established, you must then determine how that critical limit will be measured, when it will be measured, and how often it will be measured.
For my chicken sandwich, when I cook each chicken breast on the grill, I will check the internal temperature with a bimetallic stemmed thermometer (I would love a thermocouple or thermistor, but the Merou Grotto is a non-profit and they are rather pricey). I would insert the stem of the thermometer into the thickest part of the breast to determine the current temperature.
Step 5. Identify corrective actions
After you establish a monitoring procedure, you must then have a procedure in place that determines what you need to do if the critical limit is not met.
Again, as we discuss my insane chicken sandwiches, if the thermometer reveals that the breast is not above 165 degrees F, then I am to continue cooking the breast until it has reached the required temperature. A log is kept to notate this and all other corrective actions that are taken on the different food items.
Step 6. Verify that the system works
By using a temperature log to record that the critical limits are either being met or not, is how to determine if you are successfully “preventing, eliminating, or reducing to safe levels”, the possibility of foodborne contaminants.
These logs can help determine if, as with some suppliers, changes are being made to the products without your knowledge. An example of this would be a review of the temperature log and determining that more corrective actions are needed on certain days versus others. As with one company, it was found that on certain days they were receiving chicken breasts that were 6 ounces versus the standard 4 ounces that they normally received. This caused more corrective actions to be listed based on a thicker chicken breast.
Step 7. Establish procedures for record keeping and documentation
The entire H.A.C.C.P. plan works as long as you keep records of: monitoring activities, taking corrective actions, validating equipment to ensure proper working conditions), and working with suppliers (shelf life studies, invoices, specifications, etc).
At the Merou Grotto, I keep my temperature logs for three months and my invoices are electronic, so they are kept until I delete them (I used to keep paper copies for 60 days).
While the steps of the H.A.C.C.P. plan appears to be daunting, the procedures actually happen very quickly when you are working the system. Understanding where it is possible for food to become contaminated allows you to be better able to “prevent, eliminate, or reduce to safe levels” the possibility of causing a foodborne illness outbreaks.
If you have any questions about anything that I present in these lessons, or have a question about anything regarding food safety, please feel free to contact me.
Tomorrows lesson: How foods become unsafe.
by admin

September is ‪#‎National‬ ‪#‎Foodsafety‬ ‪#‎Education‬ month #NFSM. Today’s lesson: Choosing the right thermometer and how to ensure they are calibrated properly.

When choosing the right thermometer to check the temperature of your food, there are several different types to choose from, depending on how often you plan to use them, what temperature zone you are looking to check (hot or cold), whether you want internal temperature, air temperature, surface temperature, etc.

The basic type of thermometer, is the bimetallic stemmed thermometer. It has an indicator head, calibration nut, stem, and then a sensing area that would be just below a dimple in the stem. The standard scale for this type is from 0 degrees F (-18C) to 220 degrees F (104C). This allows for a wide range of temperature measures. To calibrate this thermometer, the easiest option is to place the thermometer in a glass of ice water. After at least 30 seconds, if the thermometer does not measure 32 degrees F (0C), then you just turn the calibration nut until it reads 32 degrees F.

Another type of thermometers are thermocouples and thermistors. These are generally described as digital thermometers that come in a wide range or styles and sizes. These thermometers can have interchangeable probes to check the temperatures through immersion, surface, penetration, and air. Because these thermometers are digital and have different probes that can be used, calibrations on this type usually needs to be done by a service company; however, some may have an internal reset button, and others may have a calibrate button that is pushed when you place the probe in ice water the same way you would calibrate a bimetallic stemmed thermometer.

Infrared (Laser) Thermometers are used to get accurate temperatures of food and equipment surfaces. Since the thermometer doesn’t need to come in contact with the food or equipment, it helps reduce the possibility of contamination. Calibration of this type of thermometer is completed by a service company.

Time-temperature indicators are single use items that help determine if a food item has entered the temperature danger zone and will register how long it has been in the danger zone. Food suppliers have attached these thermometers to food being shipped, in case there is an issue with delivery trucks. These time-temperature indicators change color and it provides an irreversible record of any incidents that may occur.

when it comes to taking the temperature of food, the following information should be taken into account:

1. Keep thermometers and their storage containers clean.
2. Calibrate thermometers regularly to ensure accuracy.
3. Never use a glass thermometer to monitor the temperature of food.
4. Measure internal temperatures of food by inserting the thermometer stem or prove into the thickest part of the product.
5. Wait for the thermometer reading to steady before recording the temperature of a food item.

If you have any questions about anything that I present in these lessons, or have a question about anything regarding food safety, please feel free to contact me.

Tomorrows lesson: Understanding H.A.C.C.P. for food safety.

by admin

September is ‪#‎National‬ ‪#‎Foodsafety‬ ‪#‎Education‬ month #NFSM. Today’s lesson: Proper personal hygiene practices for food safety.

When it comes to practicing proper personal hygiene for food safety, proper handwashing (which I discussed in a previous lesson), is only part of the program. A good personal hygiene program would also take into account: Maintaining personal cleanliness, wearing clean and appropriate uniforms and following dress codes, avoiding certain habits and actions, maintaining good health, and reporting illnesses.

Food handlers should keep their fingernails short, clean, and free from polish or false nails (as these could chip or fall into food being prepared). In addition, wounds and cuts should be covered with a bandage and then covered with either a finger cot (small finger only cover) or a glove.

When working with or around food, it is imperative that the food handler wear proper attire. This includes a clean hat or other hair restraint such as a hair net and clean clothing. The food handler, if wearing an apron, should remove and properly store the apron when leaving the food preparation area. All jewelry must be removed from the hands and arms when working with or around food, as the jewelry may contain microorganisms (a plain wedding band is the only exception to this). In addition to food safety, jewelry can also pose a safety hazard if worn while working with certain equipment in the kitchen.

Food handlers should not eat, drink, smoke, or chew gum or tobacco while working in or around food preparation areas. During these activities, it is possible for saliva to pass to the food handlers hands and directly to the food that the employee is working with. It must be pointed out that some health departments DO allow drinking in the food area, provided that the drink is covered and a straw is used. Doing taste tests of the foods being prepared requires the product be placed in a container for tasting, and then the utensil and container be removed from the area.

Foodhandlers must be encouraged to report health problems to the manager. There are several instances when a foodhandler must either be restricted from working with or around food or if they must be excluded from working within the facility. For instance:

1. If the foodhandler has a sore throat with fever:
          Restrict them from working with or around food, or
          Exclude them from the operation if you serve a high-risk population (elderly, pregnant women, children, immunocompromised)

2. If the foodhandler has one of the following: vomiting, diarrhea, jaundice:
          Exclude them from the operation, and before returning to work, the foodhandler with vomiting &/or diarrhea must either have been symptom free for at least 24 hours or have a written release from a medical practitioner. IF the foodhandler has jaundice, then the written release is required before they may return to the facility.

3. If the food handler has been diagnosed with an illness caused by one of the following pathogens: Salmonella Typhi, Shigella spp., Shiga toxin-producing E. coli, Hepatitis A, or Norovirus:
          Exclude the foodhandler from the operation and notify the local regulatory agency.
          The local regulatory agency and the foodhanders medical practitioner will decide when the foodhandler is able to go back to work.

Ultimately, it is the managements responsibility to ensure that proper personal hygiene is implemented and followed by all employees.

If you have any questions about anything that I present in these lessons, or have a question about anything regarding food safety, please feel free to contact me.

Tomorrows lesson: Choosing the right thermometer and how to ensure they are calibrated properly.

by admin

New #foodsafety #recall #undeclared #milk #allergen in Tasty Treats Nonpareils Milk Chocolate

First Source Issues Allergy Alert On Undeclared Milk In Tasty Treats Nonpareils Milk Chocolate

September 20, 2017

Contact

Consumers

 1-716-389-0264

Media

Joe Margarucci
 716-389-0264

Announcement

View Product Photos
First Source of Pico Rivera, CA, is recalling Tasty Treats Nonpareils Milk Chocolate because it contains undeclared milk.  People who have an allergy or severe sensitivity to Milk run the risk of serious or life-threatening allergic reaction if they consume this product.
The recalled item was distributed in the state of California through Bristol Farms retail stores.
The Product is sold in a 5oz size plastic pouch containing round chocolate discs with colorful sprinkles (nonpareils)  with a green paper label at top that states Tasty Treats, Nonpareils Milk Chocolate Bristol Farms with UPC 7 97299 00476 4 distributed between 12/20/2016 and 9/20/2017.
One illness/allergic reaction has been reported to date.
The recall was initiated after it was discovered that product containing Milk was distributed in packaging that contained the incorrect ingredient statement which did not reveal the presence of Milk. Subsequent investigation indicates the problem was caused by a temporary breakdown in the company’s label review process.
Consumers who have purchased this item are urged to destroy the product.  Consumers with questions may contact First Source at 1-716-389-0264, Monday – Friday, 8am – 5pm, EST.
###